Help
How to use Editmatic step by step, and what to do if something isn't working. Español
- 1. Getting started
- 2. Cameras and microphones
- 3. The analysis
- 4. Choosing speeches
- 5. Adjusting the cut
- 6. Review and export to Premiere or DaVinci Resolve
- 7. Alerts, sounds and size
- 8. Subscription and Macs
- 9. Common problems
- 10. Contact support
1. Getting started
You need a Mac with Apple Silicon (M1 or later) and an editing app: Adobe Premiere Pro 25.6 or later, or DaVinci Resolve 21 or later (the free version works).
- Install: download Editmatic, open the
.dmgfile, drag Editmatic to Applications and open it from there. It's signed and verified by Apple: the first time, macOS only asks whether you want to open an app downloaded from the internet. Click Open. - The first time: pick your language and Editmatic downloads its analysis engine (about 1 GB, only once). You can leave it running.
- Your account: enter your email and continue in the browser with your card. Nothing is charged during the 14-day trial.
- Permissions: if macOS asks whether Editmatic can access a disk or folder, click Allow. Without it, it can't read your footage.
- The Premiere connector installs itself the first time you open Editmatic (Creative Cloud is required). DaVinci Resolve needs nothing installed.
2. Cameras and microphones
- Drop whatever you have on Home or on New project: the whole event folder, several folders or loose files. Editmatic sorts it out on its own.
- Cameras: the folder that holds the videos is a camera. Card folders (DCIM, PRIVATE, 100MSDCF…) don't split a camera in two. A folder with only photos also counts as a camera.
- Recorders: audio files are grouped by folder (.wav, .mp3, .m4a, .aac…). If a folder has both videos and audio, the videos are the camera and the audio is a recorder.
- Above the list you see the result, for example “2 cameras, 1 recorder”. Each camera and each recorder can be removed.
- If you dropped loose files, the camera is the folder they are in and only those files are used.
- Hidden files and anything Editmatic can't read (such as subtitles or preview files) are ignored.
- At the bottom you see the count, for example “523 clips · 4 h 55 min of footage”, growing as it reads. The button says “Analyze 4 h 55 min of footage”. While analyzing, the screen says “Looking at 523 clips for you”.
- If no audio was found, the manual microphone audio control appears. It's optional: without microphones, the camera audio is used.
- If you drop an entire disk, Editmatic asks you to pick only the event folders.
- Say whether there are speeches and in which language. If there are, Editmatic finds them before preparing your cut and you choose which ones stay whole.
- Suggested phrases are hints, not rules: Editmatic also finds laughter, applause and highlights on its own.
- Sequence: Automatic uses the most common orientation in your footage. Horizontal is 16:9 and Vertical is 9:16 for social media.
- Forgot a folder? Open the project › Footage › Cameras and audio. What's already analyzed is kept: only the new footage is analyzed.
3. The analysis
- Everything happens on your Mac: your footage is never uploaded.
- You can close the window: Editmatic lets you know with a sound and a notification when it's done.
- Pause loses nothing. If the Mac shuts down or the analysis is interrupted, Resume picks up where it left off.
- With several projects, they're analyzed one at a time: the rest show Waiting.
- The view (one clip, several, or none) only changes what you see while it analyzes. No view is the fastest.
4. Choosing speeches
- When the analysis finds possible speeches, it lets you know. Click Review speeches.
- For each one, choose Whole (kept complete and protected: the cut doesn't touch it) or Trim (trimmed like any other shot).
- Any you don't review follow Editmatic's suggestion.
- Changed your mind? From the cut, Change speeches and it rebuilds.
- Angles: if several cameras filmed the same speech, the cut stacks the angles: one stays as the main one (the one that shows the speaker best, closer and sharper) and the others are stacked below it, in sync.
- Sync is measured with the audio. If it isn't reliable, the other angle is not stacked: it leaves the cut and goes to Unused.
- On the workbench, the speech card has an Angles: N button. Open it to see each camera and how it was synced (“synced by audio, confidence 82%” or “synced by clock”).
- Remove takes an angle out of the cut and sends it to Unused. Bring back returns it as one more shot: it is not stacked over the speech again.
- If the main angle doesn't cover the whole speech, the card tells you how many seconds have no camera audio.
5. Adjusting the cut
Focus and Light
- On the workbench, Focus sets how sharp a shot has to be to go in. Toward Demanding fewer shots get in; toward Tolerant, more.
- Light sets how much blown-out light, crushed blacks or changing light a shot can have.
- They are two separate controls: you can be demanding about focus and tolerant about light. The Stricter, Recommended and More permissive presets move both at once.
- Older projects open with the same cut: they are read on their own, with no new analysis.
Profiles
- Your profiles appear below Stricter, Recommended and More permissive. Click one to apply it instantly.
- To create one, move the controls and click Save as profile…. Type a name (up to 40 letters, different from the others) and press ↩; esc cancels. It is never saved on its own.
- A profile stores the five workbench controls. The checkbox for shorter shots at parties is not stored.
- The ⋯ button on each profile: Use for new projects, Rename (also by double-click) and Delete profile…. The one used for new projects carries the “Default” mark.
- A new project starts with the default profile; without one, with Recommended. Analyze again doesn't change it.
- Profiles are stored on this Mac, not in the project. If you had a “Mine” profile, it stays there under that name.
Rejected and Unused
- In the Cut panel, Rejected lists the shots that came close to going in, the closest to the limit first. Each one says why it fell.
- Unused gathers, by reason, what fell far from the limit, what doesn't compete for a spot (for example, what is already in the speech) and what you removed. It starts folded.
- Click a shot or a reason to see it in the viewer and add it to the cut.
- The phrases say by how much it fell short, for example: “out of focus: 18% short of focus”, “shaky: shook twice the allowed amount”, “blown out: 62% of the image blown out, the limit is 50%”, “too short: lasts 1.2 s, the minimum is 2 s”, “less interesting: 20% short of the score”.
- Other phrases: “the clip could not be measured”, “already in the speech”, “you removed it”.
- If you move a control and a shot that was in the cut drops out, it appears at the end of Rejected with the name of the reason.
6. Review and export to Premiere or DaVinci Resolve
- View summary, on the workbench, shows what Editmatic did and what was left out. It's only for looking: whatever you want to change, you change on the workbench.
- When the cut is ready, click Export on the workbench and choose:
- Which program? Premiere Pro or DaVinci Resolve. Editmatic remembers the last one you picked on this Mac.
- Sequences: Full, Selects and Rejected are checked. My changes shows up if you changed something by hand and is left unchecked. Unused goes along with Rejected.
- Frames per second of the sequences: the recommended one is the one you used most. The other clips adapt on their own and nothing is lost.
- Click the gold button, which says how many sequences go and to which program (for example, Send 3 sequences to Premiere Pro), or ⌘ ↩.
- If there are possible speeches you haven't reviewed, Editmatic tells you first: Review now or Export anyway. If you export anyway, suggested ones go into the cut whole and unsure ones stay in Rejected.
- Premiere Pro must be open with your project. If it's closed, the cut imports when you open it. Nothing to import by hand.
- DaVinci Resolve can be open or closed. It doesn't let other programs send it the cut: it's left ready and you bring it in with one click. With your project open, choose Workspace › Scripts › Editmatic. That click is needed for every send. Choosing Editmatic again doesn't duplicate anything.
- Your project gets an “Editmatic · project name” bin with Videos (one bin per camera), Microphone audio and, in Sequences, the ones you chose. If you used microphones, also a Soundbites sequence.
- If you send a cut you already sent, a new versioned sequence is created (v2, v3…): what is already in the project is never deleted.
- Nothing is deleted: your original videos are never touched.
7. Alerts, sounds and size
- In Settings (⌘ ,): language, interface size, alerts when done, alert and click volume (0 turns them off), and the folder where projects are saved.
- You can also change the size with ⌘ + and ⌘ −; ⌘ 0 goes back to normal.
- All shortcuts are in the app, under Help › Keyboard Shortcuts.
8. Subscription and Macs
- Each subscription works on 2 Macs. To add one: on your usual Mac, Settings › Add another Mac, then type the 6-digit code on the new one.
- Don't have the other Mac with you? On the new Mac, Confirm with my email.
- To free up a spot: Settings › Deactivate this Mac.
- Cancel: Settings › Cancel subscription. Nothing else is charged and you keep using Editmatic until the end of the period already paid (or of the trial).
- Without a subscription your projects still open and you can send finished cuts to Premiere or DaVinci Resolve. To analyze new footage, subscribe again.
- Editmatic checks your subscription online: it can go up to 3 days without a connection.
9. Common problems
macOS says it can't open Editmatic or can't verify it
That message comes from an installer older than the signed version. Download Editmatic again, open the .dmg and drag Editmatic to Applications; if asked, choose Replace. The current version is verified by Apple and opens without that message. Your projects stay as they were.
After an update, macOS asks for disk access again
It happens once, when you update to the version signed by Apple: click Allow. Your projects stay as they were.
“macOS is not allowing access to this folder”
System Settings › Privacy & Security › Files and Folders (or Full Disk Access) and turn Editmatic on. If the footage is on an external drive, check that it's still connected.
The cut doesn't reach Premiere
Check that Premiere Pro (25.6 or later) is open with a project. If you just installed Editmatic, quit and reopen Premiere so it loads the connector. If it still doesn't arrive, contact us from the app.
Editmatic isn't in the DaVinci Resolve Scripts menu
Quit and reopen DaVinci Resolve. If you installed it from the App Store, it may not see Editmatic: install the one from the Blackmagic Design website. If it still doesn't show up, contact us from the app.
Not enough disk space
The first time, Editmatic tells you how much space the engine needs. Each project only stores its analysis: it doesn't copy your videos. Free up space and try again: the download resumes where it stopped.
The analysis stopped because of an error
Click Try again. If it happens again, click Report this problem: we get the error with the project's logs so we can fix it.
I don't get the “done” alert
With Editmatic in front, the alert sound plays but no notification appears. If it's in the background and you see nothing, check System Settings › Notifications › Editmatic, and that the alert volume isn't at 0 in Settings.
There's a new version
A gold banner appears at the top: click Install and restart. To check manually: Editmatic menu › Check for Updates.
10. Contact support
From the app: Help › Contact Support (or, if something failed, Help › Report a Problem). We reply to your account email.
Every message includes technical information: details about your Mac and the latest logs of the project (the one you pick, or the most recent), which may include file and folder names. Without it we can rarely find the problem. You can see exactly what gets sent before sending it. Never videos, audio or photos.
Don't have the app yet, or can't open it? Email support@editmatic.app.